Description
The VisionRGB-E1S has a single video capture device supporting up to 1920×1080 DVI or 2048×1536 analog resolution.
The VisionRGB-E1S captures the Analog/ DVI data and triple buffers it into on-board storage. This data is then copied using DMA to the host system for display, storage or streaming.
VisionRGB-E1S transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E1S capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilities the hardware and dramatically increases performance.
The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include:
- Viewing Analog or DVI sources from PCs, MACs, industrial or medical equipment, cameras and other video equipment
- Streaming video applications
- Video wall controllers
RGB Streaming
The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include: Viewing analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment Streaming video applications and video wall controllers.
Video Streaming Support
Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VitualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
For further details see the DirectShow SDK documentation supplied as part of a typical installation.
Software
The VisionRGB-E1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E1S application to automatically detect the video source format and display the captured video in a window on your desktop.
Features
Features:
- Single channel RGB/DVI/HD video capture card
- Four Lane PCI Express interface with a maximum data rate of 650 MB/sec
- Maximum analog RGB video capture resolution of 2048×1536 x24bit
- Maximum DVI capture resolution of 1920×1200 x24bit
- HD modes using the supplied DVI/ Component Adapter or DVI/HDMI Adapter (HDCP not supported)
- On card processor for real time mode and sink detection
- Support for multiple capture cards allowing up to 32 capture channels (32 cards)
- Direct DMA driver software and streaming driver
- High quality down scaling
- Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8 video formats
- High performance DMA to system memory or direct to graphics memory with scatter gather
- Support for separate H/V sync, Composite sink or sink on Green 16 cropping windows per capture channel
- Includes WDM streaming drivers and the Datapath Vision application software
- Fully integrated with the WallControl-red software for video wall applications
- VisionRGB-E1S is also optimised for operation with the range of graphics cards
- Support for Windows® XP / Vista / Server 2003 /Server 2008 / Windows® 7 / Windows® 8 / Windows® 10 / Linux (NOTE: Check Linux specific features with Sales)
- SDK included for software developers
Specification
Specification:
| Board Format | PCI Express x4 low profile card, 68.9mm x 167.6mm PCI Express bus master with scatter gather DMA providing Maximum data rate of 650 MB/s |
| Connectors | One DVI-I type connector |
| Maximum Sample Rate | 170 MHz analogue RGB or 165 MHz DVI Analogue modes up to 340 MHz pixel clock can be captured using dual-pass sampling |
| Video Sampling | RGB: 24 bits per pixel/ 8-8-8 format |
| Video Capture Memory | 32 MB, triple buffered |
| Analogue RGB mode support | 640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 2048×1536, custom modes |
| DVI Single-link Mode Support | 640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200, custom modes |
| HD Modes | 1080p, 1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector (HDCP not supported) |
| Input Mode Detection | Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal |
| Pixel Transfer Formats | RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels YUV: 4:2:2 Mono: 8 bit |
| Update Rate | User defined, captured frame rate will match the source. Providing max data rate (650 MB/s) is not exceeded Multi-buffered to eliminate tearing artifacts |
| Video Format Options | Analogue RGB plus HSink and VSink (5 wire) Analogue RGB with Composite sink (4 wire) Analogue RGB with Sync on Green/ YPbPr (3 wire) DVI Single Link |
| Operating System Support | Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7, Windows 8 and Linux support (NOTE: Check Linux specific features with Sales) |
| Power Requirements | Max current at +3.3V – 0.25A Max current at 12V – 0.5A Max power – 6.8 Watts |
| Operating Temperature | 0 to 35 °C/ 32 to 96 °F |
| Storage Temperature | -20 to 70 °C/ -4 to 158 °F |
| Relative Humidity | 5% to 90% non-condensing |
| Warranty | 3 years |
Models
Models Available:
| ProductName/Order Code | Description |
| VisionRGB-E1S | A single channel PCI Express video capture card, PLUS 1 x DVI/VGA, 1 x DVI/component and 1 x DVI/HDMI adapters, PLUS 1 x low profile card bracket |
Your packing box should contain the following items:
- A VisionRGB-E1S video capture card
- Installation CD-ROM
- 1 x DVI/VGA, 1 x DVI/ components and 1 DVI/HDMI adapters
Download
DataSheet, Manual, Applications and Drivers:
